Welcome to EVC electronic
Since 1991 we are engaged with the special
problem of car electronics and the adjustment of engine controllers. We're offering tools for your chiptuning as soft- and hardware:
Our company supplies only tuning companies and dealers.
Almost all products are developed and
manufactured by EVC electronic. They are free of third parties' rights or delivery
opportunities. EVC electronic is ISO-9001 certified.
Your EVC team
|
|
News
BDM100
Firmware Update V2.x -> V3.0 by WinOLS V1.817
Because of a problem in the V2.x firmware the modules with that firmware don't work under Vista or Windows7. To solve that problem the firmware must be updated to V3.0.
Until now the BDM100 modules must be sent to EVC. Now this is not necessary any more. Every customer with that problem can update his BDM100 by himself. Therefore he must press in the configuration-BDM-Firmware update. This button only is enabled, if the update is possible.
The update must be done under WinXP !
BDM
New:
We have now revised the design of the probes, especially regarding the free available length of the pins.
It was too short for some ECUs and contact problems were caused. By leaving out the plastic cover, we have increased the free length by about 6 mm
Checksum news
Mitsubishi:
New
Phoenix - John Deere:
New file Deere ST10
Bosch MS 6.x Iveco, Scania:
Now also old MAN files with length of 10000h
Marelli MPC:
Now also MJD HW01 with length of 10000h
Bosch EDC7:
New Byteshooter MAN file
More news >
|
Deutsch
Italiano
