http://www.evc.de EVC electronic News en Firmware Update V2.x -> V3.0 by WinOLS V1.817 Because of a problem in the V2.x firmware the modules with that firmware don't work under Vista or Windows7. To solve that problem the firmware must be updated to V3.0. Until now the BDM100 modules must be sent to EVC. Now this is not necessary any more. Every customer with that problem can update his BDM100 by himself. Therefore he must press in the configuration-BDM-Firmware update. This button only is enabled, if the update is possible. The update must be done under WinXP ! 8 Jan 2010 10:31:37 GMT 60http://www.evc.de/de/download/down_winols.asp New: We have now revised the design of the probes, especially regarding the free available length of the pins. It was too short for some ECUs and contact problems were caused. By leaving out the plastic cover, we have increased the free length by about 6 mm 4 Nov 2009 17:21:59 GMT 59http://www.evc.de/de/product/ols/bdm/default.asp New - Now with lighting: 9 Oct 2009 10:54:40 GMT 58http://www.evc.de/de/product/ols/bdm/default.asp New in WinOLS 1.811: Improved support for MP2440P and OLS16. Unfortunately new notebooks don't provide connectivity for our older products. Therefore we have added an extended address selection, so that PCMCIA cards can be used, which don't use the usual IO addresses. After intensiv testing of available cards, we can only recommend the Quatech SPP100. It can be purchased at us. 2 Oct 2009 11:41:7 GMT 57 New in WinOLS 1.811: Improved handling of ECUs, which contain data in processor and eprom. Even with the introduction of the BDM projects the foundation was layed for more than one chip with data in one ECU. At that time the order and the assignment was done by the BDM readout. Now more and more ECUs like the Bosch ME7.1.1 are comming on the market. Mostly these ECU are readout with bootmode tools, so that at least two files must be put into one WinOLS project. Therefore WinOLS and the corresponding checksums have been improved, so that the importing of the files have got easier. 2 Oct 2009 11:23:51 GMT 56http://www.evc.de/de/download/down_winols.asp We have moved our business hours one hour earlier. So we have opened from 09:00 - 17:00. 12 Aug 2009 18:18:32 GMT 55 We have just changed the checksum purchase to a point system. So many checksum modules have got cheaper. Furthermore there is the possibility to save money by purchasing checksum packages. 30 Apr 2009 18:32:44 GMT 54http://www.evc.de/de/download/down_check.asp Neu: Import/Export module for Volvo-Vadis VBF files 20 Nov 2008 17:2:42 GMT 53http://www.evc.de/de/product/ols/import.asp New: System for OBD2 programming 19 Nov 2008 14:25:20 GMT 52http://www.evc.de/de/product/spiwizard/default.asp